Resin injection in Kent
Resin injection for subsidence instead of underpinning
Describe the cracks you have noticed and the ground your home sits on. A specialist firm will review the details and explain whether geopolymer resin ground injection suits your situation, at no cost to you.
Ground stabilisation resin Kent
What resin injection in Kent involves
- The site survey
- Before any geopolymer resin ground injection begins, a structural movement survey establishes why the footing has dropped and whether the soil type can accept treatment.
- The rig and probes
- The specialist brings a compact trailer-mounted pump. Small holes are drilled through the footing or the adjacent ground so steel probes reach the loose layer beneath.
- Injecting the resin
- Liquid geopolymer is pumped down the probes. It expands as it cures, filling voids and compacting the sand, brickearth or fill directly under the shallow foundation.
- Checking the lift
- Laser levels monitor the wall while the resin cures. The specialist stops pumping once the footing reaches the required height or the ground refuses further pressure.
Where it fits
When resin suits and when it does not
Resin injection shallow foundations work well on certain soils, but the survey findings decide everything.
- Sandy and brickearth ground Loose sand, fine brickearth and old made-up fill compress easily. Resin pushes into those gaps and hardens, giving the footing a firmer base without excavation.
- Drain leaks come first If a cracked pipe has washed soil away, the drain must be repaired before any resin goes in. Pumping resin over flowing water simply washes the material out again.
- Deep clay shrinkage On Weald or Gault clay, seasonal drying pulls moisture from deep below the footing. Resin only treats the top layers, so traditional underpinning or screw piling usually fits better.
- Old chalk pits and voids Large swallow holes or abandoned shafts need bulk fill or piled foundations. Expanding resin cannot bridge a void several metres across.
Typical costs for resin versus underpinning work
Prices vary because every home differs in wall length, depth of loose soil, access for the rig and how many probes the ground accepts. Comparing resin versus underpinning cost means looking at both the labour time and the plant each method needs on site.
-
Crack monitoring readings
£250 to £600
Number of gauges fixed and how many return visits the schedule requires.
-
£300 to £750
Length of pipework run and whether rods or cameras must pass through bends.
-
Resin injection per metre
£1,200 to £2,800
Depth of probes, volume of resin the ground absorbs and access for the rig.
-
Traditional underpinning
£2,500 to £5,000
Trench depth, soil removal, concrete volume and working space around the footing.
-
Screw piling per pile
£1,800 to £3,500
Required load, depth to firm strata and machinery access beside the house wall.
These figures indicate what work of this type typically costs. Nothing here is a quotation. Only an inspection by a specialist contractor settles a figure for one property.
On the day
What happens while the work takes place
The pump rig sits on a driveway or path. Hoses run to the probe points. Because the equipment is trailer-mounted, flower beds and lawns stay largely untouched.
Probes are worked from outside the wall wherever possible. If internal floors sit directly on the affected ground, small holes through a concrete slab may be needed, then sealed after.
Because geopolymer resin ground injection avoids the wet concrete curing period and the open trenches of excavated foundations, the specialist can usually complete the work in a shorter window. The exact time depends on how much ground needs treating.
Once the resin sets, the specialist checks levels again. Redecoration should wait until crack monitoring confirms the wall has stopped moving, which might take a few months.
Questions homeowners ask about resin injection
Answers based on what specialist contractors report from sites across the county.
- Suitability for sandy ground
- Yes, if the footings are shallow and resting on loose sand or brickearth. The resin compacts that layer. A structural movement survey must confirm there is no deeper cause like a leaking drain.
- Cost and time compared with underpinning
- Resin work usually finishes in hours rather than weeks, and avoids heavy excavation. Whether it costs less depends entirely on how much resin the ground absorbs and how many metres need treating.
- Damage to gardens and paths
- The rig is a small trailer. Hoses reach the probe points without driving heavy plant across lawns. Drill holes are roughly 16mm wide and filled once the job ends.
- Drilling through floors
- Specialists prefer to work from outside. Internal drilling only happens where the footing runs beneath a solid floor slab and external access cannot reach the void.
- Redecorating after the work
- Plaster and filler applied too soon will crack again if the wall still settles. Specialists recommend a period of crack monitoring before painting or re-pointing.
- Insurer acceptance
- Many insurers accept geopolymer resin ground injection as a permanent repair, but some policies still specify mass concrete. Ask the loss adjuster before authorising the work.
Areas covered for resin injection in Kent
Enquiries are taken from homeowners anywhere in the county. Specialist firms carry out ground stabilisation resin Kent work from the Medway towns to the coast and the Surrey border.
If your town is missing, send an enquiry anyway. Coverage extends across the whole county.
- Resin injection Maidstone
- Resin injection Gillingham
- Resin injection Chatham
- Resin injection Rochester
- Resin injection Ashford
- Resin injection Gravesend
- Resin injection Dartford
- Resin injection Royal Tunbridge Wells
- Resin injection Tonbridge
- Resin injection Sevenoaks
- Resin injection Canterbury
- Resin injection Herne Bay
- Resin injection Margate
- Resin injection Ramsgate
- Resin injection Folkestone
- Resin injection Dover
- Resin injection Deal
- Resin injection Sittingbourne
- Resin injection Sheerness
Ask about resin injection for your home
Send a description of the cracking and where it sits on the house. A specialist firm reviews the details and explains whether resin suits the ground, with no obligation to proceed.
- No fee for the enquiry
- No obligation to proceed
- Specialist firms do the work